Precision Pipe Supports
20 May 2019
Precision Pipe Supports - Suppliers of Quality Pipe Supports
EASYFIT SYSTEM CONTENTS
Clamps for assembling angle to beams complete with tie rod. Clamp for assembling angle to exixting angles. Clamp for assembling vertical angle to angles.
Clamp for assembling angles to existing channels. Clamp for assembling vertical angles to existing channels. Clamp for assembling angle to existing angles, channels.
Clamp for assembling pipes ½" to 8" with extended U-bolts to existing angles. Clamp for assembling pipes ½" to 8" with extended Hook-bolts to existing angles. Clamp for assembling pipes ½" to 8" with extended U-bolts to existing channels.
Clamp for assembling pipes ½" to 8" with extended Hook-bolts to existing channels. Clamp for assembling pipes ½" to 8" with standard U-bolts to existing beams. Clamp for assembling drop rods from existing angles to suit ½" to 8" pipes.
Clamps for assembling drop rods from vertically existing cahnnels to suit ½" to 8" pipes. Clamps for assembling drop rods from existing joists 102 x 102 x 23.07 to suit ½" to 8" pipes. Clamps for assembling drop rods from existing joists 175 x 102 x 21.54 to suit ½" to 8" pipes.
Clamps for assembling drop rods from horizontally existing channels to suit ½" to 8" pipes. Clamps for assembling drop rods from existing box section to suit ½" to 8" pipes. Attachments for assembling eye rods from existing angles to suit ½" to 8" pipes.
Attachments for assembling eye rods from existing channels to suit ½" to 8" pipes. Clamps for assembling drop rods with spherical washers from existing angles to suit ½" to 8" pipes. Clamps for assembling drop rods with spherical washers from existing channels to suit ½" to 8" pipes.
Clamps for assembling drop rods with spherical washers from existing box sections to suit ½" to 8" pipes. Clamps for assembling drop rods with spherical washer from existing joists 102 x 102 x 23.07 to suit ½" to 8" pipes. Clamp Shoes to angles, channels & beams to suit ½" to 8" pipes.
Clamp Anchors for assembling shoes to beams to suit ½" to 8" pipes. Clamp Guides for assembling shoes to beams to suit ½" to 8" pipes. Clamps for assembling ½" to 2½" pipes to angles, channels & beams.
Clamps for assembling 3" to 8" pipes to angles, channels & beams. Clamps for assembling 10" to 24" pipes to beams Option 'A'. Clamps for assembling 10" to 24" pipes to beams Option 'B'.
Standard Bare pipe hanger clips for pipes ½" - 24" (15mm - 600mm) Standard insulated pipe hanger clips for pipes ½" - 24" (15mm - 600mm)

Products can be made to suit your requirements, please contact us for more information.


Contact Precision Pipe Supports